With the increasing use of servo electric cylinder in hydraulic press, we usually encounter many difficulties in the selection of specifications and models. We do not know where to start, such as the load running for a long time, insufficient work system and other problems, so we should pay attention to the key points of model selection.

Servo electric cylinder selection guide and matters needing attention

1. Before selection, it is necessary to master whether the clear use of the site can be suitable for the application of servo electric cylinder, including installation indoor space, installation mode, working temperature, working frequency, etc.

2. For example, before purchasing a personalised embossing press with a servo motor, master the following main parameters of the servo motor: thrust/tension, stroke, speed, installation mode, application frequency, control requirements. When the thrust is selected, the theoretical load must be calculated.

3. Custom embossing press servo motor speed model selection, the standard allows the standard to choose the low speed, so that the operation is more stable, the frequency of the push rod can not be too low otherwise it will harm the power of the motor, and then harm the thrust of the push rod.

4. The installation method or mode of the servo motor of bmc manhole cover should be selected according to the specific situation, including the front flange, horizontal and vertical. Retractable electric cylinder is more economical to install indoor space than directly connected electric cylinder.

5. Control mode, basically the control requirements of the punching machine servo motor is the expansion of the push rod, that is, the positive and negative motion of the control motor can be carried out. The travel limit switch must be matched to the positive and negative control circuit of the motor. Remember that it is necessary to reasonably control the motor in the reasonable stroke category of the push rod.

In particular, it is necessary to do a good job in advance, otherwise there is a misunderstanding of the company's production and manufacturing lead to delay or damage, at this point also need to be careful. For more detailed information, please contact Cowardson, we are a professional supplier of hydraulic presses and tablet punching machine.